Damping foil 15
Areas of application

Industry
Machine tools, fans, chip extractors, printing machinery, vibrators, electric motors, hydraulic components.

Transportation and vehicles
Motorcars, buses, trucks, contractor’s machinery, forest machinery.

Hospital care and large-scale kitchens
Kitchen sink units, dishwashing machines, dialysis machines, circulation pumps, air pumps, roller tables.

Buildings
Lifts, motor rooms, fans and ducts.

Office
Computers, printers, picking and enveloping machines, copying machines.

Method of use
The parts are cut or stamped to the required shape and carefully pressed on to a surface that must be free from oil, dirt, and dust.

   Product characteristics

Damping foil 15 is a damping sheet for structure borne sound made of bitumen-impregnated textile felt with a visco-elastic damping layer.

The product has low weight, is flexible and self-adhesive

Advantages

* Good damping of thin sheet metal
* Low weight
* Odour less
* Water repellent
* Long service life
* Difficult to ignite

PDF-format for printing

Combined Loss factor, η
Measured at 0,8 mm steel sheet

Temperature, ºC
 
Technical data
Edvice
Loss factor: See diagram.

Temperature
resistance: -25°C to +100°C

Fire class: FMVSS 302

Coefficient of
thermal conductivity: Lambda=0.011W/m°C

Colour: Dark grey

Adhesive’s tear
strength : Approx. 15 N/cm test width

Surface film thickness: 36x10-6m


Environmental: Freon and PVC free

Thickness: 1,6 mm

Weight: 1,6 kg/m2

Delivery format: 1000x1000 mm
                          (other sizes and shapes                           can be supplied on request)

   The shaping and positioning of the material is of major importance to achieve an optimal sound-dampening effect.
 SONTECH has long experience of practical noise control projects in a wide range of industrial fields. These experiences can be a valuable addition to the laboratory data given in the datasheet.
  SONTECH can also assist with advice and sound measurements for noise control and in the manufacture of customised material sets .

Designation system

Damping foil: DF

Relative Loss factor: 15

Exampel of
ordering code: DF15

Sontech NoiseControl™ - Sontech AB · Energivägen 6
SE 196 37 Kungsängen · Tel +46 8 445 50 60 · Fax +46 8 38 47 99
mail@sontech.se