Acusticell S with Vinyl foil
Areas of application

Industry
Cabins Factory machinery.

Transportation and vehicles
Cabins of boats and vehicles, scooters, contractor’s and gardening machinery.

Method of use
The parts are cut or stamped to the required shape and carefully pressed on to a surface that must be free from oil, dirt, and dust.

   Product characteristics

Acusticell S with Vinyl foil is a sound absorbing material of foamed polyurethane with open cells. The product is based on Acusticell S but its surface is covered with an elastic film of perforated Vinyl. The material can be bent and is self-adhesive. Can be combined with a mat for structure-borne sound damping and airborne sound insulation.

Advantages

* Aesthetically attractive surface
* Resistant to mechanical wear
* Easy to wash
* Difficult to ignite

PDF-format for printing

Absorption Coefficient % (ISO 10534)

Frequency, Hz, Third Octave Bands
 
Technical data
Edvice
Sound absorption: See diagram.

Temperature
resistance: -40°C to +120°C

Fire class: FMVSS 302

Coefficient of
thermal conductivity: Lambda=0.036W/m°C

Colour: Grey or Black surface foil

Adhesive’s tear
strength : Approx. 15 N/cm test width

Environmental: Freon free

Surface film thickness: 36x10-6m

Thickness: 10, 20 or 30 mm (other                   thicknesses can be supplied on                   request)

Surface foil perforation ratio: 2%

Density: Approx. 25kg/m3

Delivery format: 1000x1500 mm
                          (other sizes and shapes                           can be supplied on request)

   The shaping and positioning of the material is of major importance to achieve an optimal sound-dampening effect.
 SONTECH has long experience of practical noise control projects in a wide range of industrial fields. These experiences can be a valuable addition to the laboratory data given in the datasheet.
  SONTECH can also assist with advice and sound measurements for noise control and in the manufacture of customised material sets .

Designation system

Acusticell: AC

Thickness in mm: 10,20 or 30mm

Fire class FMVSS 302: S

Surface of perforated vinyl foil: VF

Exampel of
ordering code: AC20 VF grey

Sontech NoiseControl™ - Sontech AB · Energivägen 6
SE 196 37 Kungsängen · Tel +46 8 445 50 60 · Fax +46 8 38 47 99
mail@sontech.se