Acusticab SA
Areas of application

Factory machinery, fans, mills, printing and timber handling equipment, electric generating sets, generators, engines.

Transportation and vehicles
Scooters, Contractor’s and Gardening Machinery.

Hospital care and large-scale kitchens
Vacuum Cleaners, Dish Washers.

Computers, Printers.

Elevators, Engine Rooms, Walls, Doors, Sound Studios.

Method of use
The parts are cut or stamped to the required shape and carefully pressed on to a surface that must be free from oil, dirt, and dust.

  Product characteristics

Acusticab SA is a sound absorbing material of foamed polyurethane with open cells.
The product is based on Acusticell SA but its surface is embossed and covered with an elastic film of urethane. The material can be bent and is self-adhesive.
Can be combined with a mat for structure-borne sound damping and airborne sound insulation.


* Embossed and treated surface    increases the absorption 20-35%
* Aesthetically attractive surface
* Film is resistant to petrol and most   chemicals
* Elastic and Resistant to   mechanical wear
* Repels liquids and moisture
* Easy to wash
* Fire proof

PDF-format for printing

Absorption Coefficient % (ISO 10534)

Frequency, Hz, Third Octave Bands
Technical data
Sound absorption: See diagram.

-40°C to +140°C

Fire class: Certified according to UL94 HF-1

Coefficient of
thermal conductivity:

Colour: Black surface film, grey foam.

Adhesive’s tear
strength :
Approx. 15 N/cm test width

Surface film thickness:

Environmental: Freon and PVC free

 6, 13, 19 eller 25 (other                   thicknesses can be supplied on                   request)

Density: Approx. 33 kg/m

Delivery format: 1000x1400 mm
                          (other sizes and shapes                           can be supplied on request)

  The shaping and positioning of the material is of major importance to achieve an optimal sound-dampening effect.
 SONTECH has long experience of practical noise control projects in a wide range of industrial fields. These experiences can be a valuable addition to the laboratory data given in the datasheet.
  SONTECH can also assist with advice and sound measurements for noise control and in the manufacture of customised material sets .

Designation system

Acusticell: CAB

Thickness in mm: 6, 13, 19 eller 25

Fire class UL94 V-0: SA

Surface foil colour: Black

Exampel of
ordering code:

Sontech NoiseControl™ - Sontech AB · Energivägen 6
SE 196 37 Kungsängen · Tel +46 8 445 50 60 · Fax +46 8 38 47 99